" />

The battery test

Many of the world's countries and international organizations have launched its own lithium battery safety standards and inspection requirements, which are widely used several standard have: (details and questions please contact letter tesla test battery department)
IEC 62133 Edition 2.0 portable and portable devices with seal containing alkaline or other non acidic electrolyte Secondary batteries and battery (Secondary cells and batteries containing alkaline or other non - acid electrolytes - Safety requirements for portable sealed Secondary cells, and the for batteries made from them, for use in portable applications).

IEC 61960 Edition 2.0 portable devices with containing alkaline or other non acidic electrolyte Secondary batteries and battery - Secondary lithium ion batteries and battery (Secondary cells and batteries containing alkaline or other non - acid electrolytes of Secondary lithium cells and batteries for portable applications).

IEC 60950-1 Edition 1.0 Information technology equipment Safety, Information technology equipment - Safety - Part 1: General requirements);

IEC 60086-07 4:20 a battery - Part 4: the lithium battery security (Primary batteries - Part 4: Safety of lithium batteries).

UL 1642 Ed four Lithium Batteries (Lithium Batteries).
UL 2054 Ed 2 civil and Commercial cell (Household and ltd. Batteries);
UN ST/SG/AC. 10/11 Rev. 5 / Amend. 2 Section 38.3 Dangerous Goods transportation proposal - test and standard manual (Recommendations on the Transport of Dangerous Goods - test and standard manual (Recommendations on the Transport of the Dangerous Goo



The detection method and technical requirements corresponding standards



Products use safe

Environmental adaptability

(batteries, battery)

electrical

(batteries, battery)
 

batteries

The battery

GB/T 18287

1. Heavy impact

2. Thermal abuse

3. After charging

5. 4. Mandatory discharge short circuit

6. Mechanical shock

7. The temperature cycle

1. Over charging protection

2. Over discharge protection

3. The short circuit protection
 

1.ESD (electrostatic discharge)

2. A constant humid

3. The vibration

4. The free fall

5. Depression

6. High temperature molding shell stress


1.0.2 C5A discharge

2. The discharge

3. Heat discharge

4. Discharge at low temperature

5. Charged retention and recovery capacity

6. Storage performance

7. The cycle life

8. Internal resistance

IEC 62133

1. Continuous charging

2. The external short circuit

3. The forced discharge

4. Internal short circuit

1. External short circuit

2. charging


1. The free fall

2. Thermal abuse

3. The extrusion (batteries)

4. Battery shell stress

5. Transportation (batteries)

6. High temperature molding shell stress

/

IEC 61960

/

/

/

1.20 ℃ discharge

2. - 20 ℃ discharge

3. 20 ℃ high rate discharge

4) charged to maintain and restore

5. Storage for a long time

6. The cycle life

7. Internal resistance

8. Electrostatic discharge

IEC 60086-4

(GB8897-4)

1. External short circuit

2. Mandatory discharge

3. Abnormal charge

4. Wrong installation

5. After discharge

1. External short circuit

2. Mandatory discharge

3. Abnormal charge

4. Wrong installation

5. After discharge

1. The low pressure

2. Temperature cycle

3. The vibration

4. The impact

5. The impact

6. Squeeze

7. Free fall

8. Temperature shock

/

UN ST/SG/AC.10/11 Rev.5/Amend.2 Section 38.3

1. External short circuit

2. Mandatory discharge


1. External short circuit

2. After charging


1. The low pressure

2. Temperature cycle

3. The vibration

4. The impact

5. Collision/extrusion

/

UL 1642

1. External short circuit

2. Abnormal charge

3. The discharge


1. External short circuit

2. Abnormal charge

3. The discharge


1. The vibration

2. The impact

3. The thermal shock

4. Temperature cycle

5. The impact

6. The combustion

7. Squeeze

8. Depression

/

UL 2054

1. External short circuit

2. Abnormal charge

3. The discharge


1. External short circuit

2. Abnormal charge

3. The charge

4. Discharge

5. The limit of power test


1. The vibration

2. The impact

3. The thermal shock

4. Temperature cycle

5. The impact

6. The combustion

7. Squeeze

Fall 8.

9.250 N stress tests

10. The shell stress

11. The shell fire

/

JIS C 8714

1. External short circuit

2. Mandatory internal short circuit

1. External short circuit

2. Over charging protection

1. The thermal shock

2. Squeeze

3. Drop

/

Can be seen from the table above, at present the various standards of lithium battery mainly from three perspective of lithium battery performance and safety performance: 1. The product use security; 2. Environmental adaptability; 3. Electrical. Different standards for detection of the battery have focused on: IEC 61960 is mainly focused on the e-test of lithium-ion batteries; IEC 62133 and Japan JIS C 8714 focused on products safety and environmental adaptability; GB/T 18287 not only contains some safety testing project, also covers the performance test; UL 2054 and UL 1642 inspection are all batteries and battery to be used in a variety of environments, including fault condition, stress condition and the combustion conditions of security.