On April 14 new GB 2099.3 2015 and implemented GB 2099.7 2015. In accordance with the requirements of state certification and accreditation, the new into the compulsory certification scope of implementation of converter product and national standard combined with a hole socket extension products, since 14th, do not have mandatory product certification certificate and the label is not mandatory product certification marks, not factory, sell, import or use in other business activities.
1: the new national standard on April 14, the formal implementation
On October 13, 2015, China had released the new national standard GB 2099.3 2015 "household and similar use plug sockets 2 - part 5: the special requirements of converter, and 2099.7 GB - 2015" household and similar use plug socket part 2-7: the special requirements of extension cord socket ".
According to the requirements, two standards will be implemented on April 14, 2017. So, what are the new changes new gb?
1. Set the protection door, prevent children from accidentally touch: the biggest change is to increase the new standard setting protection door. To meet the requirements of the new standard lug plate products is a must with protect door, and the old standard is not mandatory product with protection door. With protection door products will be more security, especially in the aspect of children to prevent accidental electric shock, protect door play a critical role.
2. Wire coarsens, improve the current carrying capacity, the new national standard on the lug plate conductor cross-sectional area increase to meet the requirements of the new standard lug plate products increase the cross-sectional area of soft wire of power, the power cord current carrying capacity of the larger, more security products. The rated current of the new standard of 10 A lug plate, minimal wiring cross-sectional area is 1.0 mm 2 (wiring length more than 5 meters, 1.5 2 mm), and meet the requirements of the old standard products wiring cross-sectional area is usually 0.75 2 mm; Rated current for 16 A lug plate, minimal wiring cross-sectional area is 1.5 mm 2 (wiring length more than 5 meters, 2.5 2 mm), and meet the requirements of the old standard products wiring cross-sectional area is usually 2 to 1 mm.
3. The fireproof performance improvement: the new national standard for the insulation of the lug plate material increases the combustion duration for 30 seconds needle flame test project, request needle flame fire doesn't burn after contact with the socket for 30 seconds, or light-off out automatically after 30 seconds, improve the flame retardant performance of insulation materials.
2: this kind of product should be compulsory certification
To lug plate in the production of the new national standard, but also improve the industry barriers to entry. State certification in January 2016 issued announcement, 3 clear converter and extension cord socket products mandatory product certification requirements, the new product into the compulsory certification scope of implementation, since April 14, 2017, do not have mandatory product certification certificate and the label is not mandatory product certification marks, not factory, sell, import or use in other business activities.
According to the announcement:
1. The mandatory product certification implementation rules or connection with electric circuit switch and protection device (electrical accessory) "(no. : CNCA - our fleet - 01:20 14) for household and similar purposes was added into the plug socket certification according to the standard GB 2099.3 and 2099.7 GB. Among them, the extension cord socket extension components (wire) product certification according to the standard of GB and 2099.1 GB / 1002 GB 1003 (hereinafter referred to as the old standard) changed to: 2099.1 GB, GB and 2099.7 GB / 1002 GB 1003 (hereinafter referred to as "new standard"), the certification scope of implementation in the existing GB 2099.1 wire extension based on component, increase national standard combined with a hole (commonly known as small five hole) extension socket lengthened components (wire). Converter products (except with foreign standard plug or socket) is new product into the compulsory certification scope of implementation, certification according to the standard of GB 2099.1, 2099.3 and GB / 1002 GB 1003 GB.
2. The extension cord socket lengthened components (wire), has been under the old standard for compulsory certification, the certificate holder shall be made to the specified certification agency certification according to the standard change application; New application and the accordance with the requirements of standard change request for reference on the compulsory product certification according to relevant requirements when using a standard revision announcement (announcement no. 4 in 2012 by state certification and accreditation administration).
3. About the new into the compulsory product certification scope of implementation of converter (except the plug or socket) with foreign standards and national standard combined with a hole socket extension extended components (wire) products, since April 14, 2017, do not have mandatory product certification certificate and the label is not mandatory product certification marks, not factory, sell, import or use in other business activities.
4. The laboratory should according to "about further deepen the reform of the compulsory certification system for examination and approval of implementing agencies designated work move announcement (state no.34 bulletin 2015) requires the ability to perfect" one-stop "service, after get the above products and the corresponding standard specified, can undertake related business.